 |
DMX controller,
consisting of software for DMX controllers and DMX converter box.
Features of software for the controller
- Graphic surface, easy to operate
- 120 DMX control channels (DMX-120), 60 DMX control channels (DMX-60)
- 10 operating levels with 12 channel faders each for adjusting the DMX parameters, 1 flash button for each channel fader
- 1 master fader, can be assigned to each channel as desired
- 500 programmable scenes can be stored per block
- Different blocks of scenes can be combined
- Stored scenes can also be called up via keyboard
- Automatic run of 4 parallel sequences with up to 500 scenes each
- 10 groups can be stored with up to 20 channels each
- Blackout function
- Channel inversion
- Any number of synchronous groups can be created
- Libraries can be created for every DMX unit (features of the unit like gobos and colour wheel)
- Libraries are available for every DMX unit from IMG Stage Line
- Music-controlled scenes and sequences via sound card
- Manual input of beat for controlling scenes and sequences
- German, English, French, and Spanish version
Specifications converter box
- Processor-controlled converter for 120 DMX channels (DMX-120) or 60 DMX channels (DMX-60)
- Connections: 1 x 25-pole D-Sub, 1 x 3-pole XLR, 1 x 5-pole XLR, 1 x low-voltage jack
- 115x103x40mm, 250g
- Power supply: 9-12V DC current /250mA via supplied plug-in PSU 230V˜/50Hz/5VA
Supplied accessories
- Programme CD (with instructions on CD)
- Plug-in PSU
- 25-pole D-Sub cable
System requirements
IBM compatible PC, Pentium 90 or higher, 16MB RAM, 10MB free hard disk memory, CD-ROM, parallel printer port, mouse, Windows* 9x/ME/NT/2000/XP
The software for the DMX converters DMX-120 and DMX-60 is continuously extended and updated. The current software version for each box is available as an update on MONACOR's homepage under SUPPORT-SOFTWARE.
|
