Kays Electronics 08456123501 Local call rate

Control panel for various DMX units. Clear LED display for black out, step, programming, music and automatic trigger setting.

• Ideal to control up to 12 light effects with 16 channels max. each
• Speed control from 0.1 second to 10 minutes
• 30 memory banks that can store up to 8 programs (patterns) each selection among 6 different chases with upto 240 patterns each
• Music controlled via a built-in microphone
• Ideal for 19" panel mounting or as a stand-alone unit
• MIDI connection facility (MIDI IN) to run the unit synchronous with your MIDI unit
• Supplied with mains adaptor

DMX light control panel featuring 24 channel to give you total control over your light effects.

• 48 memories with a storage capacity for running light programs of up to 99 steps each
• Numerous switch possibilities such as: up chase/down chase, single or mix chase dark, full on, fade, tap sync and hold
• Control of the connected running lights via the music signal or manually
• MIDI connection facility (MIDI IN) to run the unit synchronously with your MIDI unit
• Speed setting for the running lights with a large control range
• 24-channel dimmer control
• Clear led indication of rec step, dimmer, speed time and fade time
• Programmable up to 48 patterns (12 programs under 4 pages)
• Facility for a foot switch (6.3mm stereo jack plug)
• Ideal for 19" panel mounting or as a stand-alone unit
• Mains adaptor supplied

Running light control unit with 4 channels and 16 patterns.

• Music controlled via the built-in adjustable microphone or via the 6.3mm audio jack
• Push-buttons for direct control of the 4 channels, can also run fully automatic with adjustable speed
• Featuring nil-passage switch steps for trouble-free control of diverging loads
• LED channel indication
• Lamp connections via screw terminals
• Fixed mains lead and plug
• 19" Rack mountable

6-channel dimmer control suitable for DMX512 or analogue 0-10V control. Convenient for professional applications due to the heavy-duty 10 Amp outputs.

• Each output can be controlled separately and is fitted with an automatic safety provision with indicator lamp
• Lamp pre-heating adjustable up to 50%
• Power supply 230V single-phase or 230/400V three-phase for extreme loads
• Connections via screw terminals
• DMX in/out connections via 3-pin XLR connectors. Analogue connections via 8-pin DIN plugs
• 19" Rack mountable

REPLACEMENT LAMPS FOR LIGHTING EFFECTS

A full range of replacement lamps for all Skytronic lighting effects. Lamps should only be replaced with the same type and power as originally fitted. It is not reccomended to fit a lamp that is not equivalent to the original.Replacement lamp, 12V, 50W, GE BRL

HALOGEN PROJECTOR LAMP WITHOUT REFLECTOR

Osram halogen projector lamp without reflector. TypeEVC 24V/250W, fitting G6.35