!

DVC2 GOLD
!
dasl03-wf0
DVC2 GOLD works with Virtual Controller 1, 2 and Virtual 3D software. This interface controls 2 x 512 DMX channels through the computer or 512 DMX channels in Stand Alone mode. The Stand Alone mode is easy to use and versatile : programme and load your scenes in the internal memory of the interface, power with an external 9-12Volt DC power source and select your scene using the buttons and it sends the DMX signals that you have pre-programmed to your lighting fixtures. The new Built-in CLOCK function is simply wonderful : you can trigger a scene when you want, tomorrow at 10 pm, next week, once a year, repeat the scene every hour, play it only 30 minutes, add few minute of show every days...

DVS 3D
!
dasl04-wf0

An economic 3D viewer with amazing rendering for any traditional lighting console.

The DVS 3D works with Virtual 3D software. This interface can take DMX input and Ethernet through the 3D software and must be connected to a PC. Links are established between fixtures-libraries and DMX channels. As a result, your 3D simulator and its DVC 512 IN interface are totally compatible with all DMX consoles available on the market. Software channels can be controlled externally through conventional DMX boards in real-time. Along with the interface comes a driver disk for Windows.

Scene Setter 48 DMX
!
100048303l
The Scene Setter is a 2-bank, 12 fader, 1-bank, 24 fader DMX mixing console. The Scene Setter has 4 pages to control up to 12 channels (single bank) or 24 channels (2 banks). The Scene Setter can program 48 scenes and 24 chases of 999 steps with a total of 2376 steps. Programs can be run automatically or by external or internal music input.